Skip to content
Docs

Connecting to Keysight E4980A by Keysight in Python

Instrument Card

The E4980A precision LCR meter provides the best combination of accuracy, speed, and versatility for a wide range of component measurements.

Keysight E4980A

Device Specification: here

Manufacturer card: KEYSIGHT

KEYSIGHT

Keysight Technologies, or Keysight, is an American company that manufactures electronics test and measurement equipment and software

  • Headquarters: USA
  • Yearly Revenue (millions, USD): 5420
  • Vendor Website: here

Demo: Record voltage over time with an Agilent 34401A multimeter

Connect to the Keysight E4980A in Python

PROTOCOLS > SCPI

Here is a Python script that uses Qcodes to connect to a Keysight E4980A Multimeter:

from qcodes.instrument_drivers.Keysight.Keysight_E4980A import KeysightE4980A


# Create an instance of the instrument
meter = KeysightE4980A("meter", "TCPIP0::192.168.1.1::INSTR")


# Connect to the instrument
meter.connect()


# Perform measurements
impedance = meter.measure_impedance.get()
print("Impedance:", impedance)


# Disconnect from the instrument
meter.disconnect()

In this script, we import the KeysightE4980A class from the qcodes.instrument_drivers.Keysight.Keysight_E4980A module. We then create an instance of the instrument by providing a name and the instrument’s address (in this case, a TCP/IP address). We connect to the instrument using the connect() method.

We can then perform measurements using the instrument’s parameters and methods. In this example, we use the measure_impedance parameter to get the impedance measurement. Finally, we disconnect from the instrument using the disconnect() method.