Connecting to ATS9440-14 bit, 125 MS/s, 4 ch by Alazartech in Python

Instrument Card

ATS9440 is a 4-channel, 14-bit, 125 MS/s waveform digitizer based on the 8-lane PCI Express interface

Device Specification: here

Manufacturer card: ALAZARTECH

Alazar Technologies Inc. (AlazarTech) was founded in 2003 with the goal of serving the test and measurement market, in general, and the embedded waveform digitizer (OEM) market segment, in particular, by providing highly differentiated, high performance instrumentation products at affordable prices.

• Headquarters: CANADA - QC
• Yearly Revenue (millions, USD): 4
• Vendor Website: here

Demo: Record temperature over time with a LabJack DAQ board

Connect to the ATS9440-14 bit, 125 MS/s, 4 ch in Python

PROTOCOLS > SCPI

QCodes

Here is a Python script that uses Qcodes to connect to an ATS9440-14 bit, 125 MS/s, 4 ch DAQ board:

from qcodes.instrument_drivers.AlazarTech.ATS9440 import AlazarTechATS9440

# Connect to the ATS9440 board
daq = AlazarTechATS9440('daq', dll_path='C:\\WINDOWS\\System32\\ATSApi.dll')

# Print the available parameters
print(daq.parameters)

# Set the clock source to INTERNAL_CLOCK
daq.clock_source('INTERNAL_CLOCK')

# Set the sample rate to 125 MS/s
daq.sample_rate(125_000_000)

# Set the channel range for channel 1 to 0.1V
daq.channel_range1(0.1)

# Set the channel range for channel 2 to 0.1V
daq.channel_range2(0.1)

# Set the channel range for channel 3 to 0.1V
daq.channel_range3(0.1)

# Set the channel range for channel 4 to 0.1V
daq.channel_range4(0.1)

# Set other parameters as needed

# Close the connection to the board
daq.close()

Note: Make sure to replace 'C:\\WINDOWS\\System32\\ATSApi.dll' with the correct path to the ATSApi.dll file on your system.